Choose equipment from the packed cargo
Start with the dimensions and gross weight of every packed piece, including pallets and protection. Note whether pieces can be stacked, whether they need temperature control, and whether loading requires a crane. Container type is a physical-fit decision as well as a freight-price decision.
Check the actual unit specification and carrier acceptance before booking. Nominal capacity is not a promise that a load will fit: door openings, packing gaps, floor loading and securing space matter.
20ft, 40ft and high-cube dry containers
Dry general-purpose containers are used for cargo that does not need refrigeration. A 40ft high cube provides more height than a standard-height unit. Published internal dimensions and payloads vary by equipment series. Maersk also notes that applicable weight limits can differ by country.
Use the carrier’s specification for the booked equipment and check the unit markings. Do not infer permissible payload from volume, or assume that doubling container length doubles the permitted cargo weight. Road and terminal restrictions can further constrain the usable load.
Reefer, open top and flat rack
A reefer provides controlled-temperature equipment. Confirm the cargo’s required set point and any ventilation or monitoring requirements with the carrier. A tracking milestone is not a temperature record.
An open top allows top loading; a flat rack can accommodate shapes that do not fit a closed box. Neither means arbitrary overhang is acceptable. Provide packed dimensions, weight, lifting points and a securing plan for carrier review. Ask for written acceptance and all handling or out-of-gauge charges before dispatch.
Tank containers and specialist loads
Liquid or gas cargo needs equipment suited to the product and its transport classification. Do not choose a tank using a generic fill percentage from a blog. Give the operator the product details and safety documentation, then obtain the applicable capacity, compatibility, filling and cleaning requirements for that movement.
Worked example: why CBM alone is not enough
Suppose your packed cargo totals 38 cubic metres and a proposed container is quoted at about 33 cubic metres internally. That load cannot fit in that unit, even before allowing for gaps or securing material. Request a larger suitable unit, split the load, or change the packing.
For a smaller load, compare a full-container quote with a shared-container (LCL) quote on the same door-to-door scope. There is no fixed CBM threshold at which one is always cheaper. Include both ends’ handling and delivery charges.
Before confirming the booking
Record the packed dimensions, gross weight, stackability, loading method, required equipment specification and destination access constraints. Ask who approves the load plan and who provides securing materials.
For tracking, the container number identifies equipment; the booking or bill of lading identifies its shipment context. Confirm the carrying line from your documents. A container owner prefix does not necessarily identify the line operating this journey.